Skip to main content

Test version

Minor Versionm

by Lucas Test Admin 1

Introduction

Outline what you are going to teach someone how to do.

  1. Lubricate cam bearing on front of engine Install cam guide and lube
    • Lubricate cam bearing on front of engine

    • Install cam guide and lube

    • Cycle Time - 1:00

    • Safety Score: 5

  2. Highlight timing mark on cam gear Wear Kevlar gloves to protect against sharp edges.
    • Highlight timing mark on cam gear

    • Wear Kevlar gloves to protect against sharp edges.

    • Be aware of hand and finger placement.

    • Camshaft must be correct part # per print 4

    • Cycle Time - 2:00

    • Safety Score: 16

  3. Connect cam to guide and start installing
    • Connect cam to guide and start installing

    • Use correct lifting device

    • Wear kevlar and polyurethane coated polyester knit gloves

    • Cycle time - 2:00

    • Safety Score: 4

  4. Install cam lock Install torque bolts then finish installing cam
    • Install cam lock

    • Install torque bolts then finish installing cam

    • Cycle Time - 2:00

    • Safety Score: 4

  5. Install cam plate with 4 bolts then torque Mark bolts after torque
    • Install cam plate with 4 bolts then torque

    • Mark bolts after torque

    • Cycle Time - 2:00

    • Safety Score: 4

Conclusion

This guide to be completed by 1 person, not 2.

Dozuki System

Member since: 09/24/2009

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 144