Skip to main content

eric test 24

Major VersionM

Approved test eric

by Eric Doster

Introduction

Outline what you are going to teach someone how to do.

  1. Lubricate cam bearing on front of engine Install cam guide and lube.
    • Lubricate cam bearing on front of engine

    • Install cam guide and lube.

    • Cycle Time - 2:00

    • Safety Score: 5

  2. Highlight timing mark on cam gear Wear Kevlar gloves to protect against sharp edges.
    • Highlight timing mark on cam gear

    • Wear Kevlar gloves to protect against sharp edges.

    • Be aware of hand and finger placement.

    • Camshaft must be correct part # per print 4

    • Cycle Time - 2:00

    • Safety Score: 16

  3. Connect cam to guide and start installing
    • Connect cam to guide and start installing

    • Use correct lifting device

    • Wear kevlar and polyurethane coated polyester knit gloves

    • Cycle time - 2:00

    • Safety Score: 4

  4. Install cam lock Install torque bolts then finish installing cam
    • Install cam lock

    • Install torque bolts then finish installing cam

    • Cycle Time - 2:00

    • Safety Score: 4

  5. Install cam plate with 4 bolts then torque Mark bolts after torque
    • Install cam plate with 4 bolts then torque

    • Mark bolts after torque

    • Cycle Time - 2:00

    • Safety Score: 4

Conclusion

This guide to be completed by 1 person.

Dozuki System

Member since: 09/24/2009

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 86